Grand AM V6-3100 3.1L MFI VIN M (1994)
Turn Signal Switch: Service and Repair
Fig. 12 Column Mounted Switch Replacement.
NOTE: On Air Bag Equipped Models, Refer To Air Bag System Precautions for System Disarming & Arming Procedures. Refer to Air Bags
and Seatbelts.
1. Disconnect battery ground cable.
2. Remove horn pad and steering wheel as described under Steering Wheel. Refer to Steering and Suspension/Steering.
3
.Remove tilt lever from steering column, if equipped. If necessary position spark plug boot or other suitable device over tilt lever (to prevent
damage), then remove tilt lever using locking pliers.
4. Remove steering column upper and lower covers, then remove dampener assembly.
5. Remove switch assembly attaching screw, then remove switch, Fig.12.
6. Reverse procedure to install.
