pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Without Air Conditioning|Page 6557 > < Service Port HVAC|Locations
Page 1
background image

Vacuum Harness HVAC: Service and Repair
Without Air Conditioning

Interior Vacuum Harness

REMOVE OR DISCONNECT

1.  Negative battery cable.
2.  Right sound insulator.
3.  Harness from actuators.
4.  Temperature control cable from heater module.

 

NOTE: Use a 7mm socket to push the retaining "fingers" on the module arm together to allow for easy release of cable end.

5.  Instrument Panel trim panel and heater control. 
6.  Vacuum harness from vacuum switch.

INSTALL OR CONNECT

1.  Vacuum harness to control vacuum switch.
2.  Heater control.
3.  Vacuum lines to actuators.
4.  Temperature control cable to heater module. 
5.  Right sound insulator.
6.  Negative battery cable.

Without Air Conditioning|Page 6557 > < Service Port HVAC|Locations