Grand Prix V6-191 3.1L (1989)
and drill a 1/4 in. hole in the outlet duct and secure amplifier attachment to the outlet duct with the plastic push in retainer, see Fig. 4.
*
The remaining piece of foam tape may be used between the amplifier and the outlet duct to prevent contact and/or rattle.
Figure 1
*
Install the adapter duct, see Fig. 1.
*
Install the ash tray retainer.
NOTICE:
IT MAY BE NECESSARY TO REPOSITION THE WIRING TO ENSURE THAT THE WIRE HARNESS DOES NOT INTERFERE WITH THE
AIR FLOW FROM THE HEATER OUTLET.
*
Install the R.H. hush panel.
Labor Operation:
T1510
Labor Time
:0.7