Grand Prix V6-191 3.1L (1989)
FIG. 1
2.
Inspect the lamp in the areas shown in Figure 1 to determine the type of water management system. Views A and B show possible locations of
vent holes at the lower corners, and View C shows possible location of drain hole at bottom surface of housing.
TYPE I:
No drain hole on bottom surface of housing. No vents at lower corners of lamp.
TYPE II:
No drain hole on bottom surface of housing. Vent holes at lower corners of lamp.
TYPE III:
No drain hole on bottom surface of housing. Hooded vent holes at lower corners of lamp.
TYPE IV:
Drain hole on bottom surface of housing. Hooded vent holes at lower corners of lamp. Foam glued to housing near vent