pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Oxygen Sensors - Silica Contamination|Page 3021 > < Oxygen Sensors - Silica Contamination|Page 3019
Page 2
background image

CHART C-2B

IDLE AIR CONTROL (IAC) CIRCUIT

2.8L (VIN W) & 3.1L (VIN T) "A", "J", "L" CARLINE (PORT)
Circuit Description:
Code 35 will set when the closed throttle engine speed is 300 rpm above or below the desired (commanded) idle speed for 50 seconds. Review the
general description of the IAC operation in Section "C2".
Test Description:

Numbers below refer to circled numbers on the diagnostic chart.

1.

Continue with test even if engine will not idle. If idle is too low, "Scan" will display 80 or more counts, or steps. If idle is high it will display "0"

Oxygen Sensors - Silica Contamination|Page 3021 > < Oxygen Sensors - Silica Contamination|Page 3019