Grand Prix V6-191 3.1L (1989)
Neutral Safety Switch: Technical Service Bulletins
Starting - Neutral Start Switch Replacement
Bulletin Number:
89-7-28
Reference Number:
937103
Publish Date:
5/89
SERVICE MANUAL UPDATE-SECTION 7A
Subject:
NEUTRAL START SWITCH REPLACEMENT (440-T4 TRANSAXLE)
Models
Affected:
1988 - 1989 GRAND PRIX MODELS
SERVICE MANUAL UPDATE
The neutral start switch replacement procedure has been revised. Use the following procedure when removing or installing the neutral start switch for the
following Service manuals and pages.
Year
Model
Page
1988
Pontiac Grand Prix
7A1-6
1989
Pontiac Grand Prix
7A-12
Procedure:
REMOVE OR DISCONNECT
1.
Air cleaner assembly.
2.
Negative battery cable.
3.
Cruise control servo retaining nuts, and position servo aside.
4.
Set parking brake and place transaxle in "Neutral".
5.
Harness bracket retaining bolt from top of transaxle.
6.
Shift lever retaining nut from transaxle, position shift lever aside.
7.
Neutral switch retaining bolts at transaxle.
8.
Electrical connection from neutral switch, remove neutral switch.
INSTALL OR CONNECT
1.
Electrical connection to neutral switch.
2.
Neutral switch to transaxle.
-
Align locator notches on neutral switch.
3.
Neutral switch retaining bolts.
TIGHTEN
-
Bolts to 24 N-m (18 ft.lbs.)
4.
Shift lever to transaxle and nut.
TIGHTEN
-
Nut to 20 N-m (15 ft.lbs.)
5.
Cruise control servo to mounting studs.
TIGHTEN
-
Nuts to 2 N-m (18 in.lbs.)
