Grand Prix V6-191 3.1L (1989)
Figure 3
vRemove or Disconnect
1.
Pry out control button assembly with thin bladed screwdriver along top edge of assembly.
2.
Disconnect steering wheel control connector.
vInstall or Connect
1.
Connect steering wheel control connector.
2.
Push control button assembly into place.
CONTROL BUTTON ASSEMBLY BULBS
These bulbs are not replaceable at the dealership. For bulb replacement, send the control button assembly to a Delco repair shop.
HORN OPERATION
Horn operation is not affected by the steering wheel control system or removal of the control button assembly.
Figure 4 - Removing Steering Wheel
STEERING WHEEL
Figure 4 Tools required:
J1859-03 String Wheel Puller
Figure 5 - Control Button Removal
CONTROL BUTTONS
Figure 5