Grand Prix V6-191 3.1L VIN M SFI (1998)
3. Align the front floor console bracket locating retainers to slots in the instrument panel (IP).
4. Push the front floor console forward into the IP until the front floor console retainers are fully seated.
NOTE: Refer to Fastener Notice in Cautions and Notices.
5. Install the front floor console bolts at the transaxle shift lever mounting bracket.
Tighten
Tighten the front floor console bolts to 5 N.m (44 lb in).
6. Install the front floor console bolts at the base of the rear storage compartment.
Tighten
Tighten the front floor console bolts to 5 N.m (44 lb in).
7. Install the rear storage compartment (1), if equipped install the front storage compartment (2).
8. Install shift control knob and indicator bezel.
