Grand Prix V6-191 3.1L VIN M SFI (1998)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Replacement (Front)
REMOVAL PROCEDURE
IMPORTANT: The front wheel speed sensors and rings are integral with the hub and bearing assemblies. If a speed sensor or a ring needs
replacement, replace the entire hub and bearing assembly. Do not service the harness pigtail individually because the harness pigtail is part of the
sensor. Refer to "Rear Suspension" in Suspension.
1. Raise and support the vehicle on a suitable hoist.
2. Remove the front tire and wheel assembly.
3. Remove the front wheel speed sensor electrical connector (2).
4. Remove the hub and bearing assembly (2).
INSTALLATION PROCEDURE