Grand Prix V6-191 3.1L VIN M SFI (1998)
Brake Pedal Assy: Service and Repair
Brake Pedal Bracket Replacement
REMOVAL PROCEDURE
1. Remove the instrument panel carrier.
2. Remove the brake pedal push rod retaining clip (3) at the brake pedal.
3. Remove the brake pedal nut (10) and bolt (9).
4. Remove the brake pedal (5).
5. Remove the stoplamp switch (2).
6. Remove the cruise control switch.
7. Remove the wiring harness clips from the bracket (3).
8. Remove the brake pedal bracket upper mounting nuts to cross car beam.
9. Remove the brake pedal bracket upper mounting bolts to cross car beam.
10. Remove the brake pedal bracket lower mounting bolts to reinforcement bracket.
11. Remove the brake pedal bracket.
12. Inspect all components for wear. Repair or replace the worn parts as necessary.
INSTALLATION PROCEDURE