Grand Prix V6-191 3.1L VIN M SFI (1998)
Radiator Hose: Service and Repair
Radiator Hose Replacement - Inlet
REMOVAL PROCEDURE
^
Tools Required
-
J 38185 Hose Clamp Pliers
1. Partially drain the cooling system. Refer to Draining and Filling Cooling System in Service and Repair.
2. Remove the left diagonal brace. Refer to Brace Replacement - Sheet Metal Diagonal in Body and Frame.
3. Use the J 38185 in order to reposition the inlet hose clamp at the thermostat housing.
4. Disconnect the inlet hose from the thermostat housing.
5. Use the J 38185 in order to reposition the inlet hose clamp at the radiator.
6. Disconnect the inlet hose from the radiator.
7. Remove the inlet hose.
INSTALLATION PROCEDURE