Grand Prix V6-191 3.1L VIN M SFI (1998)
Drive Belt Tensioner: Service and Repair
REMOVAL PROCEDURE
1. Remove the drive belt. Refer to Drive Belt Replacement.
2. Remove the drive belt tensioner bolt.
3. Remove the drive belt tensioner.
INSTALLATION PROCEDURE
1. Install the drive belt tensioner.
2. Install the drive belt tensioner bolt.
^
Tighten the drive belt tensioner bolt to 50 Nm (37 ft. lbs.).
NOTICE: Refer to Fastener Notice in Service Precautions.
3. Install the drive belt. Refer to Drive Belt Replacement.
