Grand Prix V6-191 3.1L VIN M SFI (1998)
Center Mounted Brake Lamp Bulb: Service and Repair
REMOVAL PROCEDURE
1. Open the rear compartment lid.
2. Depress the retaining tab on the rear of the high-mounted stoplamp vent and lower the vent.
3. Release the rear compartment lamp wiring from the slot in the forward edge of the vent.
4. Rotate the high-mounted stoplamp socket(s) counterclockwise to release from the high-mounted stoplamp.
5. Remove the bulb(s) from the socket(s).
INSTALLATION PROCEDURE
1. Install the bulb(s) to the socket(s).
2. Install the high-mounted stoplamp socket(s) to the high-mounted stoplamp, then rotate the socket(s) clockwise to secure.