Grand Prix V6-191 3.1L VIN M SFI (1998)
Camshaft Position Sensor: Service and Repair
REMOVAL PROCEDURE
1. Disconnect the negative battery cable.
2. Remove the serpentine drive belt.
3. Refer to Steering and Suspension for removal of power steering pump assembly.
4. Remove the electrical connector.
5. Remove the bolt.
6. Remove the sensor.
INSTALLATION PROCEDURE
1. Install the camshaft Position Sensor. Tighten the retaining bolt to 10 Nm (8 lb. ft.).
2. Install the electrical connector.
3. Install the power steering pump.
4. Install the serpentine drive belt.