Grand Prix V6-191 3.1L VIN M SFI (1998)
22. Install the left engine splash shield.
23. Install the left front wheel.
24. Lower the vehicle.
25. Install the engine mount struts.
26. Remove the J 36462.
27. Remove the J28467-90.
28. Remove the J 28467-A.
29. Install the throttle body air inlet duct.
30. Connect the battery ground (negative) cable.
31. Adjust the fluid level.
NOTICE: Do NOT overfill the transaxle. The overfilling of the transaxle causes foaming, loss of fluid, shift complaints, and possible damage to
the transaxle.
32. Inspect for proper completion of the repairs.
33. Inspect for fluid leaks.