Grand Prix V6-191 3.1L VIN M SFI (1998)
2. Use the J 29130 to install a new seal.
3. Install the J 37292-B in the seal.
4. Install the drive axle to the transaxle.
IMPORTANT: Carefully guide the axle shaft past the lip seal. Do NOT allow the shaft splines to contact any portion of the seal lip surface or
damage to the seal will occur.
5. Remove the J 37292-B.
6. Install the right lower ball joint to the right steering knuckle.
7. Install the right tie rod end to the right steering knuckle.
8. Install the right stabilizer shaft link to the right lower control arm.
9. Install the right engine splash shield.
10. Install the right front tire and wheel.
11. Lower the vehicle.
12. Adjust the fluid level.
13. Inspect for proper completion of the repairs.
14. Inspect for proper fluid level.
15. Inspect for fluid leaks.
