Grand Prix V6-191 3.1L VIN M SFI (1998)
14. Slide large diameter of the outboard boot (1) with the large boot retaining clamp (2) in place over the outside of the CV joint outer race (3) and
locate the boot lip in the groove on the CV joint outer race.
IMPORTANT: The outboard boot (1) must not be dimpled, stretched or out of shape in any way. If the outboard boot (1) is not shaped correctly,
equalize the pressure in the outboard boot (1) and shape the boot properly by hand.
15. Crimp the boot retaining clamp (1) using J 35910.
Crimp the clamp (1) to 174 Nm (130 ft. lbs.)
16. Check the gap dimension on the clamp ear. Continue tightening until the gap dimension is reached.
