Grand Prix V6-204 3.4L DOHC (1992)
Case: Service and Repair
4T60 (440-T4) Automatic Transaxle
Case Side Cover and Gaskets
CASE SIDE COVER AND GASKETS 4T60 (440-T4)
Case Side Cover Pump And Valve Body
TOOLS REQUIRED:
^
J 28467-A Engine Support Fixture
^
J 28467-90 Engine Support Fixture Adapter
^
J 36462 Engine Support Adapter Leg
REMOVE OR DISCONNECT
1. Air cleaner assembly.
2. Negative battery cable.
3. Install J 28467-A, J 28467-90 and J 36462.
4. Torque struts at engine mounts.
5. Crossover pipe.
6. Two bolts at top of transaxle mount bracket. Refer to "Transaxle Bracket".
7. Raise vehicle and suitably support.
8. Left front tire and wheel assembly.
9. Left front brake caliper and bracket.
10. Four bolts at hub and bearing assembly.
11. Left drive axle.
12. Left lower ball joint.
13. Left inner fender splash shield.
CAUTION: Failure to disconnect the intermediate shaft from the rack and pinion stub shaft can result in damage to the steering gear and/or