pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Recall - Catalytic Converter Inspection/Replacement|Page 1383 > < Recall - Catalytic Converter Inspection/Replacement|Page 1381
Page 5
background image

QTY. PER

DESCRIPTION

PART NUMBER

VEHICLE

Kit, Catalytic Converter with Upper

25056983

1

Beads (Includes Fill Hole Plug)

*Package, Lower Bed Bead

25056903

As Needed
to Fill Converter

Clamp, Converter Front Exhaust

1259609

If Needed

Bolt, Intermediate Exhaust Pipe to

11502877

2, If

Converter

Needed

Bolt, Exhaust Hanger to Converter

11504596

2, If
Needed

*A Lower Bed Bead Package, when used along with beads removed from the old converter, will complete approximately ten (10) vehicles. Refer to
special instructions outlined in the Warranty Credit Section of this bulletin.
Additional fill hole plugs, if required, may be ordered using Part Number 8998202.

SPECIAL TOOLS:

A.

Converter Bead Replacement Tool Kit

In Spring 1983 each Pontiac Dealer was shipped one (1) complete catalytic converter Bead Exchange Kit (J-34155), no charge. The kit
consists of:

J-34155-1

Sifting Pan (Qty. 1)

J-34155-2

Storage Pans (Qty. 2)

J-34155-3

Funnel (Qty. 1)

In the event additional kits are required by the dealer, they may be purchased from:

Kent-Moore Tool Division Kent-Moore Corporation 29784 Little Mack Roseville, MI 48066

B.

Converter Plug Installer

As part of the 1983 essential service tool program, Converter Plug Installer (J-34118) was also forwarded from source to all Pontiac dealers.

ENCLOSED WITH THE COPY OF THIS BULLETIN

A list of those vehicles involved which our records indicate are in your geographical area is attached for your follow-up. Advise the zone if vehicles
appearing on the attached list are not in your area. (If a list of vehicles is not attached, our records indicate no affected vehicles in your area.)

If a vehicle has been transferred or sold to another location, please forward the new name and address of the vehicle to your Pontiac zone office.

RECORDING COMPLETION

Campaign completion will be recorded from "PROPERLY COMPLETED AND PAID WARRANTY CLAIMS". Owners are being asked to present the
owner reply card for identification to their dealer at the time they bring in their vehicle to have the campaign performed.

DEALERS SHOULD STILL SUBMIT WARRANTY CLAIMS FOR CREDIT IN THEIR NORMAL MANNER WHEN THEY PERFORM THE
SERVICE AS FOLLOWS:

(A completed warranty claim is to be kept as a permanent record of completion.)

WARRANTY CREDIT

A separate repair order must be used for each vehicle.
OTHER*

FAILURE

LABOR

LABOR

LABOR

DESCRIPTION

CODE

OPERATION

HOURS

HOURS

Inspect Catalytic

Recall - Catalytic Converter Inspection/Replacement|Page 1383 > < Recall - Catalytic Converter Inspection/Replacement|Page 1381