Grand Prix V6-3.8L (2007)
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the front fender liner screws to the wheel opening.
Tighten the front fender liner screws to 7 N.m (61 lb in).
3. Install the front fender liner screws to the lower rear of the fender.
Tighten the screws to 7 N.m (61 lb in).
4. Install the front fender liner screws to the lower engine compartment side rail.
Tighten the screws to 7 N.m (61 lb in).
5. Install the front fender liner screws at the front bumper fascia.
Tighten the screws to 2 N.m (18 lb in).
6. Lower the vehicle.