pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Trim Panel > < Sunshade Anchor Replacement
Page 1
background image

Sun Visor: Service and Repair
Sunshade Replacement

Sunshade Replacement

The sunshades may be equipped with an illuminated vanity mirror. The illuminated vanity mirror is not serviced as a separate unit.

Removal Procedure

1. Remove the screws from the sunshade mounting plate.
2. Remove the sunshade.
3. Disconnect the electrical connector from the sunshade, if equipped.
4. Remove the sunshade anchor from the roof by unsnapping, if needed.

Installation Procedure

1. Install the sunshade anchor by pressing into place until fully seated, if removed.
2. Connect the electrical connector to the sunshade, if equipped.
3. Position the sunshade to the roof.

Notice:  Refer to Fastener Notice in Service Precautions.

4. Install the screws to the sunshade.

Tighten the sunshade screws to 3 N.m (27 lb in).

Trim Panel > < Sunshade Anchor Replacement