Grand Prix V6-3.8L (2007)
2. Install the J-hook retainers (1) to the support frame (2).
3. Reposition the trim cover side flap on the bolster under and over the side rail of the seat back frame.
4. Reposition the release handle cable to the right seat bolster, if equipped.
Notice: Refer to Fastener Notice in Service Precautions.
5. Install the bolts to the left and/or the right seat bolsters.
Tighten the bolts to 6 N.m (53 lb in).
6. Install the rear seat back.
Rear Seat Back Cushion Pad Replacement
Rear Seat Back Cushion Pad Replacement
Tools Required
J 38778 Door Trim Pad and Garnish Clip Remover
Removal Procedure
1. Remove the seat back cover.