Grand Prix V6-3.8L (2007)
Exhaust Pipe: Service and Repair
Exhaust Crossover Pipe Replacement
Exhaust Crossover Pipe Replacement (RPOs L26/L32)
Removal Procedure
1. Remove the fuel injector sight shield.
2. Remove the air cleaner intake duct.
3. Remove the exhaust crossover heat shield nuts (1).
4. Remove the exhaust crossover heat shield (2).
5. Remove the exhaust crossover pipe studs (3) and the bolts (2).
6. Remove the exhaust crossover pipe (1).
7. Remove the exhaust crossover pipe seal (4).
Installation Procedure