pontiac Workshop Repair Guides

Pontiac Workshop Service and Repair Manuals

Heater Core Cover Replacement|Page 13394 > < Heater Core Cover Replacement|Page 13392
Page 1
background image

Heater Core: Service and Repair
Heater Core Replacement

Heater Core Replacement

Tools Required

J 38185 Hose Clamp Pliers

Removal Procedure

1. Drain the coolant. Refer to Draining and Filling Cooling System (L26, L32 GE 47716 Fill) Draining and Filling Cooling System (L26, L32 Static

Fill) Draining and Filling Cooling System (LS4 GE 47716 Fill) Draining and Filling Cooling System (LS4 Static Fill).

2. Use J 38185 in order to position aside the heater hose inlet and outlet clamps at the heater core.
3. Disconnect the inlet and outlet heater hose from the heater core.
4. Remove the RH Instrument Panel Closeout/Insulator panel.
5. Remove the LH Instrument Panel Closeout/Insulator panel.
6. Remove the floor carpet.
7. Remove the rear floor air outlet duct from the holes in the floor reinforcement.
8. Disconnect the rear floor air outlet duct from the heater core outlet cover.
9. Remove the rear floor air outlet duct.

10. Remove the heater core outlet cover screws (2).
11. Remove the heater core outlet cover heat stakes (1) with a small chisel.
12. Remove the heater core outlet cover from the HVAC module assembly.

Heater Core Cover Replacement|Page 13394 > < Heater Core Cover Replacement|Page 13392