Grand Prix V6-3.8L VIN 2 (2004)
1. Install the striker (2) to the door opening.
Align the striker to the alignment marks.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the screws to the striker.
Tighten the screws to 20 N.m (15 lb ft).
3. Adjust door striker. Refer to Lock Striker Adjustment - Door (See: Rear Door/Rear Door Striker/Adjustments) .
4. Inspect the door for proper operation.
5. Install the front or the rear trim if removed.
6. Install the rear quarter lower trim panel. Refer to Trim Panel Replacement - Rear Quarter Lower (See: Interior Moulding / Trim/Trim
Panel/Service and Repair) in Interior Trim.
7. Install the lower center pillar trim. Refer to Trim Panel Replacement - Lower Center Pillar (See: Interior Moulding / Trim/Trim Panel/Service and
Repair/Trim Panel Replacement - Lower Center Pillar) .
