Grand Prix V6-3.8L VIN 2 (2004)
Trunk / Liftgate Interior Trim Panel: Service and Repair
Floor Trim Plate Replacement - Rear
Floor Trim Plate Replacement - Rear
Removal Procedure
1. Open the rear compartment.
2. Remove the rear compartment sill plate. Refer to Compartment Sill Plate Replacement - Rear (See: Interior Moulding / Trim/Scuff Plate/Service
and Repair) .
3. Lift up on the center of the floor trim plate and remove either edge from the side panel.
4. Remove the floor trim plate from the rear compartment.
Installation Procedure
1. Position the floor trim plate into the rear compartment.