Replacing Lower Intake Manifold for Grand Prix V6-38L VIN 2 (2004)
11. Install the brake booster hose (1 ) to the vacuum source manifold (2).
12. Connect the electrical connectors to the following:
^
Mass Air Flow (MAF) sensor
^
Manifold Absolute Pressure (MAP) sensor
^
EVAP purge solenoid
^
Electronic Throttle Control (ETC)
13. Install the right spark plug wires to the ignition control module and the upper intake manifold.
14. Install the air cleaner intake duct.
15. Install the fuel injector sight shield.
16. Fill the cooling system.
17. Connect the negative battery cable.
18. Inspect for fluid or vacuum leaks.
