Grand Prix V8-5.3L (2007)
1. Align the communication interface module to the vehicle location antenna module bracket.
Notice: Refer to Fastener Notice.
2. Install the communication interface module screws.
Tighten the screws to 2 N.m (18 lb in).
3. Align the vehicle location antenna module bracket to the locator on the I/P carrier (cross car beam).
4. Start the bolts by hand to avoid cross threading. Install the vehicle location antenna module bracket bolts (3, 4, 5).
Tighten the bolts to 10 N.m (89 lb in).
5. Install the I/P trim pad.
