GTO V8-6.0L VIN U (2005)
Front Subframe: Service and Repair
Frame Replacement - Front
Tools Required
*
J 28467-B Universal Engine Support Fixture
*
J 41803 Engine Support Fixture
Removal Procedure
1. Remove the front wheels and tires. Refer to Tire and Wheel Removal and Installation in Front Suspension.
2. Remove the stabilizer shaft. Refer to Stabilizer Shaft Replacement in Front Suspension.
3. Remove the power steering gear. Refer to Power Steering Gear Replacement in Power Steering System.
4. Remove the lower control arms. Refer to Lower Control Arm Replacement in Front Suspension.
5. Remove the lower control arm rods. Refer to Front Lower Control Arm Rod Replacement in Front Suspension.
6. Remove the lower control arm rod insulators. Refer to Front Lower Control Arm Rod Insulator Bushing Replacement in Front Suspension.
7. Remove the hood. Refer to Hood Replacement (Without Hood Scoops) (See: Doors, Hood and Trunk/Hood/Service and Repair/Hood
Replacement (Without Hood Scoops))Hood Replacement (With Hood Scoops) (See: Doors, Hood and Trunk/Hood/Service and Repair/Hood
Replacement (With Hood Scoops)) in Body Front End.
8. Using the J 28467-B and J 41803 support/raise the engine.
9. Remove the engine mount brackets from the front frame. Refer to Engine Mount Bracket Replacement - Left and Engine Mount Bracket
Replacement - Right in Engine Mechanical - 6.0L.
10. Support the front frame (2) on a jack and remove the 4 bolts (3, 4) securing the front frame (2) to the side frame members (1).
11. Lower and remove the front frame (2) from the vehicle.
Installation Procedure