GTO V8-6.0L VIN U (2005)
4. Install the retaining screw (2), in the lower edge of the rear quarter upper trim panel.
Tighten the rear quarter upper trim panel retaining screw to 2 N.m (18 lb in).
5. Install the rear lower seat belt bolt (1).
Tighten the seat belt bolt to 42.5 N.m (31 lb ft).
6. Install the rear quarter trim panel. Refer to Trim Panel Replacement - Rear Quarter (See: ) .
7. Install the upper center trim panel. Refer to Trim Panel Replacement - Upper Center Pillar (See: ) .
Trim Panel Replacement - Rear Window Shelf
Trim Panel Replacement - Rear Window Shelf
Removal Procedure
1. Remove the rear quarter upper trim panel. Refer to Trim Panel Replacement - Rear Quarter Upper (See: Trim Panel Replacement - Rear Quarter
Upper) .
2. Remove the high mount stop light. Refer to High Mounted Stop Lamp Replacement in Lighting Systems.
3. Remove 2 emergency lid release cable assembly retaining screws (1).
4. Pull the rear compartment emergency lid release cable assembly away from the rear window trim panel assembly.
5. Remove 3 rear window trim panel assembly retainers (1).
6. Remove 1 rear window trim panel assembly-to-rear sheet metal retainer (2).
7. Lift the front edge of the rear window trim panel assembly and feed the rear compartment lid emergency release cable through the slot in the parcel