GTO V8-6.0L VIN U (2005)
2. Remove the outer side cover retaining screw (1).
3. Remove the outer side cover plug (2), by rotating counterclockwise, then remove the retaining screw (3).
4. From under the seat, squeeze together the two outer side cover retaining tangs (4), while gently pulling outward on the outer side cover.
5. Disconnect the adjustment switch electrical connector (1).
6. Disconnect the EZ-entry module electrical connector (2).
7. Disconnect the seat recliner electrical connector (3).
8. Remove the outer side cover from the vehicle.
INSTALLATION PROCEDURE