GTO V8-6.0L VIN U (2005)
Wheel Speed Sensor: Service and Repair
Wheel Speed Sensor Jumper Harness Replacement - Front (Right)
Wheel Speed Sensor Jumper Harness Replacement - Front (Right)
Removal Procedure
1. Raise and support the vehicle.
2. Remove the wheel speed sensor jumper electrical connector (3) from retaining clip (4).
3. Disconnect the wheel speed sensor jumper electrical connector (3).
4. Pull the grommet and wheel speed jumper harness through the inner fender pass-through.
5. Remove the wheel speed sensor jumper (2) from the front strut mounting (3), noting the routing of the wheel speed sensor jumper.