GTO V8-6.0L VIN U (2005)
Fuel Level Sensor: Service and Repair
Fuel Sender Assembly Replacement
FUEL SENDER ASSEMBLY REPLACEMENT
TOOLS REQUIRED
J 45722 Fuel Sender Lock Ring Wrench
REMOVAL PROCEDURE
1. Remove the fuel tank assembly.
2. Disconnect the fuel tank pressure sensor connector (1), the fuel pump connector (2), and the EVAP vapor hose quick connector (3), from the
modular fuel pump and sender assembly cover (4).
3. Remove the flanged nut securing the modular fuel pump and sender assembly ground terminal to the fuel tank flange stud, and remove the fuel
tank wiring harness.