GTO V8-6.0L VIN U (2005)
15. If equipped, remove the 2 washers (4,7).
16. Remove and discard and the 2 bolts (2,3).
17. Lift the locking tab on the wheel speed sensor connector (4).
18. Disconnect the wheel speed sensor connector from the knuckle.
19. Separate the knuckle from the strut.
20. Remove the strut nut cap (1).
21. Use a wrench in order to hold the end of the strut rod shaft (4).
22. Remove and discard the strut nut (2).
23. Remove the strut bumper stop (3).
24. Lower the strut assembly.
25. Remove the stabilizer shaft link from the strut bracket.
26. Remove the strut assembly from the vehicle.
Installation Procedure
