GTO V8-6.0L VIN U (2005)
Shift Linkage: Service and Repair
Floor Shift Control Knob Replacement
Floor Shift Control Knob Replacement
Removal Procedure
1. Remove the TORX(tm) screw from the control lever knob.
2. Gently pull up to remove the knob from the transmission control assembly.
Installation Procedure
1. Install the control lever knob onto the transmission control assembly.
2. Notice: Refer to Fastener Notice in Service Precautions.
Install the TORX(tm) screw.
Tighten the TORX(tm) screw to 2 - 3 Nm (17 - 27 inch lbs.).