GTO V8-6.0L VIN U (2005)
1. Important: If replacing a flywheel, note the location of any existing balance weight pins relative to the position of the flywheel locating hole. If
replacing the flywheel and balance weight pins are installed in the original flywheel, use a suitable pin punch and remove the pins from the old
flywheel and then reinstall them in the same relative location in the replacement part. Install the balance weight pins either flush or below flush
with the machined surface of the flywheel.
If replacing the flywheel, Install any balance weights, if applicable.
2. Install the manual transmission flywheel to the crankshaft, if applicable.
3. Install the automatic transmission flywheel to the crankshaft, if applicable.
4. Apply threadlock GM U.S. P/N 12345382, Canada P/N 10953489, or equivalent to the threads of the flywheel bolts.
Notice: Refer to Fastener Notice in Service Precautions.