J2000/Sunbird V6-191 3.1L (1992)
Brake Master Cylinder: Service and Repair
Master Cylinder (with ABS)
ABS Hydraulic Modulator Assembly Removal
WARNING: To avoid personal injury, due to a retained load on the modulator assembly, the "Gear Tension Relief" function of the TECH 1
scan tool must be performed prior to removal of the brake control and motor assembly.
REMOVE OR DISCONNECT
1. Using Tech 1, performing "Gear Tension Relief Sequence".
2. Two solenoid electrical connectors.
3. Fluid level sensor electrical connector.
4. 6-Pin and 3-Pin motor pack electrical connectors.
5. Four brake pipes.