Montana AWD V6-3.4L VIN E (2004)
Keyless Entry Receiver: Service and Repair
REMOTE CONTROL DOOR LOCK RECEIVER REPLACEMENT
REMOVAL PROCEDURE
1. Remove the instrument panel (IP) upper trim.
2. Disengage the retaining tabs in order to remove the door lock receiver from the IP upper trim.
3. Disconnect the electrical connector from the door lock receiver.
INSTALLATION PROCEDURE
1. Connect the electrical connector to the door lock receiver.
2. Engage the retaining tabs in order to install the door lock receiver to the IP upper trim.
3. Install the IP upper trim.
4. Program transmitter to the new receiver. Refer to Transmitter Programming. See: Testing and Inspection/Programming and Relearning
