Montana AWD V6-3.4L VIN E (2004)
Door Lock Cylinder: Procedures
Lock Cylinder Replacement - Door
LOCK CYLINDER REPLACEMENT - DOOR
REMOVAL PROCEDURE
1. Remove the front door outside handle.
2. Remove the lock cylinder retainer from the front door outside handle.
3. Remove the front door lock cylinder from the front door outside handle.
INSTALLATION PROCEDURE
1. Install the front door lock cylinder to the front door outside handle.
2. Install the lock cylinder retainer to the front door outside handle.
3. Install the front door outside handle.
Frozen Lock Cylinder Repair
Frozen Lock Cylinder Repair
Use the following procedure in order to repair frozen lock cylinders that are frozen due to cold weather:
1. Using a heat gun, apply heat to the cylinder area.
2. Hold the shutter open with a paper clip or a similar item and force air into the cylinder using compressed air and a blow gun attachment.
3. Hold the shutter open and inject a small amount of Super-Lube(R) GM P/N 12346241 (Canadian P/N 1093474) or equivalent.
4. Work the key into the cylinder several times.
5. Wipe the excess lubricant from the key.