Montana AWD V6-3.4L VIN E (2004)
Power Mirror Motor: Service and Repair
Motor Replacement - Power Mirror
Removal Procedure
1. Remove the outside rearview mirror face. Refer to Mirror Face Replacement (See: Service and Repair/Mirror Face Replacement) .
2. Remove the outside rearview mirror. Refer to Mirror Replacement - Power (With Turn Signal Indicator) (See: Service and Repair/Mirror
Replacement - Power (With Turn Signal Indicator))Mirror Replacement - Power (Without Turn Signal Indicator) (See: Service and Repair/Mirror
Replacement - Power (Without Turn Signal Indicator)) .
3. Remove the outside rearview mirror motor screws.
4. Remove the outside rearview mirror motor from the mirror housing.
Installation Procedure
1. position the outside rearview mirror motor to the mirror housing.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the outside rearview mirror motor screws.
Tighten the screws to 10 N.m (89 lb in).
3. Install the outside rearview mirror. Refer to Mirror Replacement - Power (With Turn Signal Indicator) (See: Service and Repair/Mirror
Replacement - Power (With Turn Signal Indicator))Mirror Replacement - Power (Without Turn Signal Indicator) (See: Service and Repair/Mirror
Replacement - Power (Without Turn Signal Indicator)) .
4. Install the outside rearview mirror face. Refer to Mirror Face Replacement (See: Service and Repair/Mirror Face Replacement) .