Montana AWD V6-3.4L VIN E (2004)
Luggage Rack: Service and Repair
Luggage Carrier Replacement
Luggage Carrier Replacement
Removal Procedure
Important: Remove the luggage carrier as an assembly.
1. Remove the front and rear mounting screws from the luggage carrier.
2. Remove the center mounting screws, if equipped, from the luggage carrier.
3. Remove the luggage carrier from the roof with an assistant.
Installation Procedure
1. Position the luggage carrier to the roof with an assistant.
Notice: Refer to Fastener Notice in Cautions and Notices.
2. Install the center mounting screws, if equipped, to the luggage carrier.
Tighten the screws to 6 N.m (53 lb in).
3. Install the front and rear mounting screws to the luggage carrier.
Tighten the screws to 6 N.m (53 lb in).