Montana AWD V6-3.4L VIN E (2004)
2. Install the brake caliper (1) to the brake caliper bracket (2).
3. Lubricate the brake caliper bolt shaft. Do not lubricate the threads.
4. Lubricate the brake caliper bolt boots (4) in the brake caliper bracket (3).
Notice:
Refer to Fastener Notice in Service Precautions.
5. Install the brake caliper bolts.
-
Tighten the bolts to 44 Nm (32 ft. lbs.).
6. Use a flat-bladed tool in order to install the brake caliper bracket boot over the shoulder of the brake caliper bolt.
7. Remove the plugs in the brake hose end.
Important: Install NEW copper brake hose gaskets (3).