Montana AWD V6-3.4L VIN E (2004)
6. Remove the vertical engine mount strut bracket bolt from the right engine mount strut bracket.
7. Remove the lower engine mount strut bracket bolt from the right engine mount strut bracket.
8. Remove the right engine mount strut bracket.
Installation Procedure
1. Position the right engine mount strut bracket over the pin locator.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the lower engine mount strut bracket bolt through the right engine mount strut bracket into the cylinder block.
Tighten the engine mount strut bracket bolt to 50 Nm (37 ft. lbs.).
3. Install the vertical engine mount strut bracket bolt through the right engine mount strut bracket to the cylinder head.
Tighten the engine mount strut bracket bolt to 50 Nm (37 ft. lbs.).
4. Install the air conditioning compressor.
5. Install the engine wiring harness bracket bolt.
Tighten the engine wiring harness bracket bolt to 13 Nm (110 inch lbs.).
