Montana AWD V6-3.4L VIN E (2004)
2. Remove the engine mount strut bracket bolts from the engine mount strut bracket.
3. Remove the engine mount strut bracket from the upper radiator support.
Installation Procedure
1. Position the engine mount strut bracket over the upper radiator support. Ensure that the engine mount strut bracket and the engine mount strut are
aligned to the proper holes of the upper radiator support.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the engine mount strut bracket bolts to the engine mount strut bracket.
Tighten the engine mount strut bracket bolts to 26 Nm (19 ft. lbs.).
