Montana AWD V6-3.4L VIN E (2004)
1. Install the engine mount strut.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the bolt and the nut to the engine mount strut at the engine mount strut bracket on the upper radiator support.
Tighten the engine mount strut bolt to 48 Nm (35 ft. lbs.).
3. Install the bolt and the nut to the engine mount strut at the left engine mount strut bracket on the engine.
Tighten the engine mount strut nut to 48 Nm (35 ft. lbs.).
Right
Engine Mount Strut Replacement - Right
Removal Procedure