Montana AWD V6-3.4L VIN E (2004)
9. Remove the generator from the generator bracket and position the generator above the drive axle.
10. Remove the drive belt tensioner.
11. Remove the generator bracket.
12. Remove the power steering pipes from the power steering pipe retainer.
13. Remove the fuel pressure test port (schrader valve) cap from the fuel injector rail.
14. Remove the power steering pump and reposition the power steering pump in front of the timing chain cover in order to provide access for the
generator.
IMPORTANT: Do not disconnect the power steering pipes from the power steering pump.
15. Remove electrical harness from retainer on right fender well and position aside.
16. Remove the generator from the vehicle.
INSTALLATION PROCEDURE
1. Install the generator to the vehicle and position the generator above the drive axle.
2. Install electrical harness to retainer on right fender well.
3. Install the power steering pump to the engine.
4. Install the fuel pressure test port (schrader valve) cap to the fuel injector rail.
5. Install the power steering pipes from the power steering pipe retainer.
6. Install the generator bracket.
7. Install the drive belt tensioner.
8. Install the generator to the generator bracket and position the generator above the drive axle.
9. Install the drive belt tensioner.
10. Install the generator to the generator bracket.
