Montana AWD V6-3.4L VIN E (2004)
![background image](/pontiac/montana_awd/v6-3.4l_vin_e/Page-1437002.png)
1. Install the starter motor.
2. Install the starter motor bolts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the starter motor bolts to 47 N.m (35 lb ft).
3. Install the torque converter cover.
4. Install the starter motor S terminal electrical lead and nut.
Tighten
Tighten the starter motor solenoid S terminal nut to 3 N.m (27 lb in).
5. Install the starter motor BAT terminal electrical leads and nut.
Tighten
Tighten the starter motor solenoid BAT terminal nut to 10 N.m (89 lb in).
6. Install radiator air baffle assembly.
7. Lower the vehicle.
8. Install the battery ground (negative) cable to the battery.