Montana AWD V6-3.4L VIN E (2004)
8. Use the utility jack in order to support the lower control arm.
9. Remove the stabilizer link from the lower control arm.
10. Use the J 41820 in order to disconnect the ball joint from the knuckle.
11. Use the utility jack in order to lower the lower control arm and relieve the coil spring tension.
Notice: Refer to avoid chipping or scratching the coating in Service Precautions.
12. Remove the coil spring (2).
Installation Procedure
Notice: Refer to avoid chipping or scratching the coating in Service Precautions.