Montana AWD V6-3.4L VIN E (2004)
Drive/Propeller Shaft: Component Tests and General Diagnostics
Propeller Shaft Diagnosis
Review the propeller shaft system function.
Inspect for loose or missing propeller shaft-to-flange bolts (2) and (4).
^
Tighten or replace as necessary.
The propeller shaft (3) and the constant velocity (CV) joints are not serviceable. The CV joints and seals should be inspected periodically, whenever
the vehicle is serviced.
The CV joint seals should be inspected for the following:
^
Tears
^
Cracks
^
Contamination of the lubricating grease
Carefully pinch the seal and feel for the presence of grit
^
Loose or missing seal clamps
^
Leakage of lubricating grease from the seals
The CV joints should be inspected for the following conditions:
^
Binding or impeded motion during axial movement of the front and rear CV joints
^
Binding or impeded motion during lateral movement of the rear CV joint
^
Loose or missing crimped-on end caps
^
Leakage of lubricating grease from the end caps
The propeller shaft must be replaced if any of the above conditions exist. This will ensure that the propeller shaft continues to operate as intended, and
does not damage the other driveling components.
