Montana AWD V6-3.4L VIN E (2004)
![background image](/pontiac/montana_awd/v6-3.4l_vin_e/Page-1250009.png)
17. Align the following items while latching:
^
The wheel drive shaft outboard seal (1)
^
The tripot housing
^
The large seal retaining clamp (2)
18. Using the J 35566, latch the large seal retaining clamp. Ensure that the latching tangs are fully engaged in the large seal clamp band.
19. Rotate the outer tripot housing four or five times in order to distribute the grease throughout the tripot spider bearings.